| 1. | Conveyor belts - determination of strength of mechanical fastening - static test method
输送带机械接头强度的测定静态试验方法 |
| 2. | Conveyor belts - determination of strength of mechanical fastenings - static test method
传送带.机械紧固件的强度测定.静态试验法 |
| 3. | Conveyor belts - determination of strength of mechanical fastenings - static test method
输送机皮带.机械固定强度的测定.静态试验法 |
| 4. | Iso 1120 : conveyor belts - determination of strength of mechanical fastenings - static test method iso 1120 : 2002 ; german version en iso 1120 : 2002
传送带.机械紧固件强度测定.静态试验方法 |
| 5. | The mechanical fastening of the pressure sensor does not require any additional strain relief as the construction of the cable is suitable to take a maximum tensile force of 1000 n . an additional weight can be screw - fitted to increase the actual weight of the sensor
固定压力传感器不需要任何额外的张力缓解，因为电缆的结构能够承载最大张力达1000n 。通过螺栓可以固定额外重物来增加传感器的重量。 |
| 6. | The mechanical fastening of the pressure sensor does not require any additional strain relief , as the construction of the cable is suitable to take a maximum tensile force of 1000 n . an additional weight can be screw - fitted to increase the actual weight of the sensor
固定压力传感器不需要任何额外的张力缓解，因为电缆的结构能够承载最大张力达1000n 。通过螺栓可以固定额外重物来增加传感器的重量。 |
| 7. | The control unit chassis must be subject to a further inspection for the correct types , good mechanical fastening and reliable electrical connections of all its components , such as pcb ' s switches and keys , transformers and so forth ( refer to the control unit assembly and the wiring diagram )
控制部件底盘必须进行进一步的检查，包括所有元件的正确型号、完好的机械固定、导线连接，例如印刷电路板的开关、调节器、变压器、等等。 |
| 8. | This paper introduces kinds , advantages and shortcomings , designing principles , and its failure properties of adhesive bonded joints and mechanical fastened joints of frp pipe . carry technique research of the frp pipe and steel pipe or steel spare parts . pass the analysis to various adhesive - bonded joint , aim at the actual application of adhesive - bonded joint within frp pipe and steel pipe or spare parts choice strengthen adhesive - bonded joint inside and outside to apply
本文介绍了玻璃钢管道胶接连接和机械连接的种类、优缺点、设计原则及其连接的破坏特性,进行了玻璃钢管本体、玻璃钢管法兰、玻璃钢管与玻璃钢管法兰连接处的强度测试试验,并进行了试验结果分析,提出进行玻璃钢管与钢管及钢管件胶接技术研究的必要性。 |
